207-592-6182

PEACE OF MIND

ABOVE GROUND,

BECAUSE:

 

 

WE’RE TAKING CARE OF WHAT’S BELOW GROUND

As a Premier Septic Solutions provider- New England Septic Solutions offers the highest rated, greenest Nitrogen Reduction Septic Solutions for Residential and Commercial Wastewater treatment applications. Our Nitrogen Reduction Septic Solutions reduce nitrogen levels by more than 70% over standard septic systems.

NITROGEN REDUCTION RESIDENTIAL SEPTIC SYSTEMS

Your Fuji Clean treatment system accepts wastewater from your home, processes it and sends clean water back to the environment (usually into a soil absorption system such as a leach field). The advantage of our process is that our systems do the purification work ordinarily accomplished by the soil, which therefore allows smaller, shallower and less obtrusive drain fields.

ce5 cutaway 2 - Reduced Nitrogen Septic Systems

FUJI CLEAN CEN5

The CEN5 is a stable, compact, one-tank workhorse. With a footprint of only 8' x 4'2", this system is rated to treat domestic strength wastewater flows of 500-gallons per day to NSF 40/245 standards making it a go-to choice for septic professionals designing systems in environmentally sensitive locations where maximum nitrogen reduction is required or desired.

Weighing in at a highly maneuverable 463 pounds, this fibre-reinforced plastic (FRP) unit can be squeezed into tight and difficult sites. Designed to accommodate variable flows and shock loadings as well as being highly energy efficient (1.2 kWh/day), this low maintenance system, like the other CEN residential models, is ideally suited for both replacement sites and new construction.

Application:

Designed to treat up to 500 gallons per day of domestic strength wastewater, the one-tank CEN5 is the most compact of the company's enhanced nitrogen removal systems, specifically designed for use in nutrient sensitive areas. With the smallest footprint of any comparable system, the unit is certified to NSF/ANSI 40/245 standards and has demonstrated best-in-class nitrogen removal performance in multiple-state field testing protocols.

Features:
  • Reliable, Robust Performance. Based on both 3rd party testing in the U.S. (NSF), and corroborated by thousands of field test data points worldwide (including the U.S.) the CEN5 produces a consistent effluent quality with a pollutant removal ratio of around 97% to 98% and nitrogen reducing ratio of 75% (NSF data), For a technical explanation of system application, please refer to our Technical Summary.
  • Proven Technology. With over 50 years' experience, 2+ million installed systems (and currently installing over 40,000 per annum), Fuji Clean Co., Ltd. (Fuji Clean USA's parent company) is the world's leading manufacturer of onsite wastewater treatment systems. With over 50 engineers on staff and a relentless pursuit of product improvement, the breakthrough CE and CEN model series are the company's most popular and successful product lines.
  • Low Profile. Aesthetically pleasing, the only visible indication of these one-tank systems are two 20" diameter and one 24" diameter at-grade covers. The unobtrusive football-sized FujiMAC 80RII blower and very small alarm panel can be located up to 100-ft. away and easily shielded from direct view.
  • Easy Maintenance. The CEN unit is designed for efficient and effective semi-annual maintenance; the majority of which is accomplished with simple turning of control dials that purges heavy bio-film growth from the treatment media. No messy component removal and hose-down is necessary. A typical service visit that includes solids backwash cleaning takes about 20-30 minutes. The system is designed for efficient storage of sludge. Depending on use and influent strength, typical sludge pumpout is 1x every 2-3 years.
  • Low Operational Cost. Best-in-class FujiMAC RII series linear diaphragm air blowers are both energy efficient and durable. Compare the system's 1.2 kWh/day power draw with the energy required of other systems. FujiMAC blowers should last around 5-years and low-cost blower rebuild kits are available from all Fuji Clean certified distributors and service providers.
  • Quiet. FujiMAC 80RII blower operates at a "library quiet" 39 decibels.
  • Easy Installation. Plug and play units are ready for installation upon delivery. No onsite system assembly required. Systems are compatible with both Tuf-Tite and Polylok risers.
Full Specifications:

ModelCEN5
ANSI/NSF CertifiedNSF-40 Height (inches)65.7
Load (Bedrooms)6 Length (inches)95.7
Load Hydraulic (GPD)630 Width (inches)49.2
Typical Effluent Quality BOD (mg/L)10-20 Inlet Invert (inches, rounded to 1/8”)53
Typical Effluent Quality TSS (mg/L)10-20 Outlet Invert (inches, rounded to1/8”)51
Typical Effluent Quality TN (mg/L)10-20 Volume Total Tank (gallons)749
Power Use (kWh/day)1.27 Volume Chamber 1, Sedimentation (gal)277
MaterialFibre-Reinforced Plastic Volume Chamber 2, Anaerobic (gal)278
Weight (lbs.)463 Volume Chamber 3, Aeration (gal)127
Access Ports (number)3 Volume Chamber 3a, Storage (gal)63
Risers2 Tuf-Tite 20-inch Risers1 Tuf-Tite 24-inch Riser Volume Chamber 3b, Disinfection (gal)4
MAC80R AIR BLOWER (standard blower for CE7 system)
Blower Model / CFMMAC80R / 2.8 CFM Outlet Pipe Size13mm ID (18mm OD)33/64 inch ID (45/64 inch OD)
Air Flow Volume80 L/min2.8 cfm Weight5.0kg11 lbs.
Normal Pressure15 kPa2.2 psi Power Consumption54W
Rated Voltage120V Power Cable3×18AWG×1.8m (5ft.11in.)
Frequency60Hz ManufacturerMade in Japan by Fuji Clean

Designers and Installers

Please choose to view or download a Septic System Structural PDF file or download a CAD file below:

ce5 cutaway 2 - Reduced Nitrogen Septic Systems

FUJI CLEAN CEN7

The CEN7 is a rugged, compact, one-tank workhorse. Featuring a footprint of only 8′-2” x 4′-8″, this system is rated to treat domestic strength wastewater flows of 700-gallons per day to NSF 40/245 standards making it a logical choice for septic professionals designing systems for mid-sized homes in tight, environmentally sensitive locations where maximum nitrogen reduction is required or desired.

Weighing only 705 pounds, this durable, hand-laid fibre-reinforced plastic (FRP) unit can be squeezed into tight and difficult sites. Designed to accommodate variable flows and shock loadings as well as being highly energy efficient (1.7 kWh/day), this low maintenance system, like the other CEN residential models, is ideally suited for both replacement sites and new construction.

Application:

Designed to treat up to 700 gallons per day of domestic strength wastewater, the one-tank CEN7 model is the company’s mid-size residential system for enhanced nitrogen removal in nutrient sensitive areas. Certified to NSF/ANSI 40/245 standards, this exceptionally small footprint system has demonstrated best-in-class nitrogen removal performance in multiple-state field testing protocols.

Features:
  • Reliable, Robust Performance. Based on both 3rd party testing in the U.S. (NSF), and corroborated by thousands of field test data points worldwide (including the U.S.) the CE5 produces a consistent effluent quality with a pollutant removal ratio of around 97% – 98% and nitrogen reducing ratio of 75% (NSF data), For a technical explanation of system application, please refer to our Technical Summary.
  • Proven Technology. With over 50 years’ experience, 2+ million installed systems (and currently installing over 40,000 per annum), Fuji Clean Co., Ltd. (Fuji Clean USA’s parent company) is the world’s leading manufacturer of onsite wastewater treatment systems. With over 50 engineers on staff and a relentless pursuit of product improvement, the breakthrough CE and CEN model series are the company’s most popular and successful product lines.
  • Low Profile. Aesthetically pleasing, the only visible indication of these one-tank systems are two 20” diameter and one 24” diameter at-grade covers. The unobtrusive football-sized FujiMAC 100RII blower and very small alarm panel can be located up to 100-ft. away and easily shielded from direct view.
  • Easy Maintenance. The CEN unit is designed for efficient and effective semi-annual maintenance; the majority of which is accomplished with simple turning of control dials that purges heavy bio-film growth from the treatment media. No messy component removal and hose-down is necessary. A typical service visit that includes solids backwash cleaning takes about 20-30 minutes. The system is designed for efficient storage of sludge. Depending on use and influent strength, typical sludge pumpout is 1x every 2-3 years.
  • Low Operational Cost. Best-in-class FujiMAC RII series linear diaphragm air blowers are both energy efficient and durable. Compare the system’s 1.7 kWh/day power draw with the energy required of other systems. FujiMAC blowers should last around 5-years and low-cost blower rebuild kits are available from all Fuji Clean certified distributors and service providers.
  • Quiet. FujiMAC 100RII blower operates at a “library quiet” 40 decibels.
  • Easy Installation. Plug and play units are ready for installation upon delivery. No onsite system assembly required. Systems are compatible with both Tuf-Tite and Polylok risers.
Full Specifications:
Technical Specifications , CE10 Treatment System
ModelCEN7
ANSI/NSF CertifiedNSF-40 Height (inches)73.6
Load (Bedrooms)8 Length (inches)98.8
Load Hydraulic (GPD)900 Width (inches)56.7
Typical Effluent Quality BOD (mg/L)10-20 Inlet Invert (inches, rounded to 1/8”)61
Typical Effluent Quality TSS (mg/L)10-20 Outlet Invert (inches, rounded to1/8”)59
Typical Effluent Quality TN (mg/L)10-20 Volume Total Tank (gallons)1,069
Power Use (kWh/day)1.27 Volume Chamber 1, Sedimentation (gal)397
MaterialFibre-Reinforced Plastic Volume Chamber 2, Anaerobic (gal)396
Weight (lbs.)705 Volume Chamber 3, Aeration (gal)181
Access Ports (number)3 Volume Chamber 3a, Storage (gal)90
Risers2 Tuf-Tite 20-inch Risers1 Tuf-Tite 24-inch Riser Volume Chamber 3b, Disinfection (gal)6
MAC80R AIR BLOWER (standard for CE10 system)
Blower Model / CFMMAC80R / 2.8 CFM Outlet Pipe Size13mm ID (18mm OD)33/64 inch ID (45/64 inch OD)
Air Flow Volume80 L/min2.8 cfm Weight5.0kg11 lbs.
Normal Pressure15 kPa2.2 psi Power Consumption54W
Rated Voltage120V Power Cable3×18AWG×1.8m (5ft.11in.)
Frequency60Hz ManufacturerMade in Japan by Fuji Clean
Designers and Installers

Please choose to view or download a Septic System Structural PDF file or download a CAD file below:

ce14 ce21 cen10 cen14 tank cutaway 3 2023 - Reduced Nitrogen Septic Systems

FUJI CLEAN CEN10

The CEN10 is a reliable, compact, one-tank workhorse. Featuring a footprint of only 9'-11" x 5'-9", this system is rated to treat domestic strength wastewater flows of 1,000-gallons per day to NSF 40/245 standards making it a perfect choice for septic professionals designing systems for larger homes in tight, environmentally sensitive locations where maximum nitrogen reduction is required or desired.

Weighing only 926 pounds, this hand-laid fibre-reinforced plastic (FRP) unit can be squeezed into tight and difficult sites using standard excavating equipment. Designed to accommodate variable flows and shock loadings as well as being highly energy efficient (2.7 kWh/day), this low maintenance system, like the other CEN residential models, is ideally suited for both replacement sites and new construction.

Application:

Designed to treat up to 1,000 gallons per day of domestic strength wastewater, the one-tank CEN10 model is the company's larger size residential system for enhanced nitrogen removal in nutrient sensitive areas. Certified to NSF/ANSI 40/245 standards, this exceptionally small footprint system has demonstrated best-in-class nitrogen removal performance in multiple-state field testing protocols.

Features:
  • Reliable, Robust Performance. Based on both 3rd party testing in the U.S. (NSF), and corroborated by thousands of field test data points worldwide (including the U.S.) the CEN10 produces a consistent effluent quality with a pollutant removal ratio of around 97% - 98% and nitrogen reducing ratio of 75% (NSF data), For a technical explanation of system application, please refer to our Technical Summary.
  • Proven Technology. With over 50 years' experience, 2+ million installed systems (and currently installing over 40,000 per annum), Fuji Clean Co., Ltd. (Fuji Clean USA's parent company) is the world's leading manufacturer of onsite wastewater treatment systems. With over 50 engineers on staff and a relentless pursuit of product improvement, the breakthrough CE and CEN model series are the company's most popular and successful product lines.
  • Low Profile. Aesthetically pleasing, the only visible indication of these one-tank systems are two 20" diameter and one 24" at-grade covers. The unobtrusive football-sized FujiMAC 150RII blower and very small alarm panel can be located up to 100-ft. away and easily shielded from direct view.
  • Easy Maintenance. The CEN unit is designed for efficient and effective semi-annual maintenance; the majority of which is accomplished with simple turning of control dials that purges heavy bio-film growth from the treatment media. No messy component removal and hose-down is necessary. A typical service visit that includes solids backwash cleaning takes about 20-30 minutes. The system is designed for efficient storage of sludge. Depending on use and influent strength, typical sludge pumpout is 1x every 2-3 years.
  • Low Operational Cost. Best-in-class FujiMAC RII series linear diaphragm air blowers are both energy efficient and durable. Compare the system's 2.7 kWh/day power draw with the energy required of other systems. FujiMAC blowers should last around 5-years and low-cost blower rebuild kits are available from all Fuji Clean certified distributors and service providers.
  • Quiet. FujiMAC 150RII blower operates at a "library quiet" 41 decibels.
  • Easy Installation. Plug and play units are ready for installation upon delivery. No onsite system assembly required. Systems are compatible with both Tuf-Tite and Polylok risers.
Full Specifications:

Technical Specifications , CEN10, Commercial Treatment System
ModelCEN10
ANSI/NSF CertifiedNSF40 Height (inches)78
Load (Bedrooms)N/A Length (inches)119
Load Hydraulic (GPD)1,350 Width (inches)69
Typical Effluent Quality BOD (mg/L)10-20 Inlet Invert (inches, rounded to 1/8”) 62
Typical Effluent Quality TSS (mg/L)10-20 Outlet Invert (inches, rounded to1/8”) 59.5
Typical Effluent Quality TN (mg/L)10-20 Volume Total Tank (gallons)1,498
Power Use (kWh/day)2.7 Volume Chamber 1, Sedimentation (gal)
MaterialFibre-Reinforced Plastic Volume Chamber 2, Anaerobic (gal)
Weight (lbs.)926 Volume Chamber 3, Aeration (gal)
Access Ports (number)3 Volume Chamber 3a, Storage (gal)
Risers2 Tuf-Tite 20-inch Risers1 Tuf-Tite 24-inch Riser Volume Chamber 3b, Disinfection (gal)
MAC150R AIR BLOWER (standard blower for CE21 system)
Blower Model / CFM (Standard)MAC150R / 5.3 CFM Outlet Pipe Size20mm ID(26mm OD)25/32 inch ID(1-1/32 inch OD)
Air Flow Volume150 L/min5.3 cfm Weight9.0kg19 lbs., 13 oz.
Normal Pressure20 kPa2.6 psi Power Consumption120W
Rated Voltage120V Power Cable3×18AWG×1.8m (5ft.11in.)
Frequency60Hz ManufacturerMade in Japan by Fuji Clean

Designers and Installers

Please choose to view or download a Septic System Structural PDF file or download a CAD file below:

NITROGEN REDUCTION COMMERCIAL SEPTIC SYSTEMS

Your Fuji Clean treatment system accepts wastewater from your home, processes it and sends clean water back to the environment (usually into a soil absorption system such as a leach field). The advantage of our process is that our systems do the purification work ordinarily accomplished by the soil, which therefore allows smaller, shallower and less obtrusive drain fields.

ce14 ce21 cen10 cen14 tank cutaway 3 2023 - Reduced Nitrogen Septic Systems

FUJI CLEAN CEN14

The CEN14 is a dependable, robust, one-tank workhorse. No preceding septic tank is required or necessary for robust, dependable treatment (unless dictated by state or local regulations). Featuring a footprint of only 12'-9" x 6', this system is rated to treat domestic strength wastewater flows of 1,350-gallons per day to NSF 40/245 standards making it a perfect choice for septic professionals designing systems in environmentally sensitive locations where maximum nitrogen reduction is required or desired.

Weighing only 1,168 pounds, this fiber-reinforced plastic (FRP) unit can be squeezed into tight and difficult sites using standard excavating equipment. Designed to accommodate variable flows and shock loadings as well as being highly energy efficient (3.7 kWh/day), like the other CEN models, is ideally suited for both replacement sites and new construction. Low maintenance requirements allow the unit to be completely inspected and serviced in less than one hour.

Application:

Designed to treat up to 1,350 gallons per day of domestic strength wastewater, the one-tank CEN14 model is designed for large residential / small commercial enhanced nitrogen removal in nutrient sensitive areas. Certified to NSF/ANSI 40/245 standards, this exceptionally small footprint system has demonstrated best-in-class nitrogen removal performance in multiple-state field testing protocols.

Features:
  • Reliable, Robust Performance. Based on both 3rd party testing in the U.S. (NSF), and corroborated by thousands of field test data points worldwide (including the U.S.) the CEN14 produces a consistent effluent quality with a pollutant removal ratio of around 97% - 98% and nitrogen reducing ratio of 75% (NSF data), For a technical explanation of system application, please refer to our Technical Summary.
  • Proven Technology. With over 50 years' experience, over 2+ million residential and 50,000 installed and operating commercial systems, FujiClean Co., Ltd. (FujiClean USA's parent company) is the world's leading manufacturer of high efficiency onsite wastewater treatment systems. The company employs over 30 full-time staff engineers, with a focus on product testing and product improvement. The breakthrough CE and CEN model series are the company's most popular and successful product lines.
  • Low Profile. Aesthetically pleasing, the only visible indication of these one-tank systems are two 20" diameter and one 24" at-grade covers. The unobtrusive football-sized FujiMAC 200R blower and very small alarm panel can be located up to 100-ft. away and easily shielded from direct view.
  • Easy Maintenance. The CEN14 unit is designed for efficient and effective semi-annual maintenance; the majority of which is accomplished with simple turning of control dials that purges heavy bio-film growth from the treatment media. No messy media removal or hose-down is necessary. A typical service visit of a commercial system that includes solids backwash cleaning takes less than one hour. The system is designed for efficient storage of sludge. Typical sludge pump out for commercial systems is recommended once every 1-2 years.
  • Low Operational Cost. Best-in-class MAC Series linear diaphragm air blowers are both energy efficient and durable with typically twice the warranty of competitive blowers. Compare the CEN14 system's 3.7 kWh/day power draw with the energy required of other systems. Low-cost air blower rebuild kits are available from all certified FujiClean service providers.
  • Quiet. FujiMAC blower operates at a "dishwasher quiet" 55 decibels.
  • Easy Installation. Plug and play units are ready for installation upon delivery. No onsite system assembly required. Systems are compatible with both Tuf-Tite and Polylok risers.
Full Specifications:

Technical Specifications , CEN14, Commercial Treatment System
ModelCEN14
ANSI/NSF CertifiedN/A Height (inches)81.3
Load (Bedrooms)N/A Length (inches)152.8
Load Hydraulic (GPD)1,876 Width (inches)72.4
Typical Effluent Quality BOD (mg/L)10-20 Inlet Invert (inches, rounded to 1/8”)
Typical Effluent Quality TSS (mg/L)10-20 Outlet Invert (inches, rounded to1/8”)
Typical Effluent Quality TN (mg/L)10-20 Volume Total Tank (gallons)2,252
Power Use (kWh/day)2.88 Volume Chamber 1, Sedimentation (gal)
MaterialFibre-Reinforced Plastic Volume Chamber 2, Anaerobic (gal)
Weight (lbs.)1,168 Volume Chamber 3, Aeration (gal)
Access Ports (number)3 Volume Chamber 3a, Storage (gal)
Risers2 Tuf-Tite 20-inch Risers1 Tuf-Tite 24-inch Riser Volume Chamber 3b, Disinfection (gal)
MAC150R AIR BLOWER (standard blower for CEN14 system)
Blower Model / CFM (Standard)MAC150R / 5.3 CFM Outlet Pipe Size20mm ID(26mm OD)25/32 inch ID(1-1/32 inch OD)
Air Flow Volume150 L/min5.3 cfm Weight9.0kg19 lbs., 13 oz.
Normal Pressure18 kPa2.6 psi Power Consumption120W
Rated Voltage120V Power Cable3×18AWG×1.8m (5ft.11in.)
Frequency60Hz ManufacturerMade in Japan by Fuji Clean

Designers and Installers

Please choose to view or download a Septic System Structural PDF file or download a CAD file below:

ce30 cen21 tank cutaway 3 2023 - Reduced Nitrogen Septic Systems

FUJI CLEAN CEN21

The CEN21 is a dependable, robust, one-tank workhorse. No preceding septic tank is required or necessary for robust, dependable treatment (unless dictated by state or local regulations). Featuring a footprint of only 15'-4" x 6'-7", this system is rated to treat domestic strength wastewater flows of 1,900-gallons per day to NSF 40/245 standards making it a perfect choice for septic professionals designing systems in environmentally sensitive locations where maximum nitrogen reduction is required or desired.

Weighing only 1,543 pounds, this fiber-reinforced plastic (FRP) unit can be squeezed into tight and difficult sites using standard excavating equipment. Designed to accommodate variable flows and shock loadings as well as being highly energy efficient (5.4 kWh/day), like the other CEN models, is ideally suited for both replacement sites and new construction. Low maintenance requirements allow the unit to be completely inspected and serviced in less than one hour.

Application:

Designed to treat up to 1,900 gallons per day of domestic strength wastewater, the one-tank CEN21 model is designed for commercial enhanced nitrogen removal in nutrient sensitive areas. Certified to NSF/ANSI 40/245 standards, this exceptionally small footprint system has demonstrated best-in-class nitrogen removal performance in multiple-state field testing protocols.

Features:
  • Reliable, Robust Performance. Based on both 3rd party testing in the U.S. (NSF) and corroborated by thousands of field test data points worldwide (including the U.S.), the CEN21 produces a consistent effluent quality with a pollutant removal ratio of around 97% - 98% and nitrogen reducing ratio of 75% (NSF data).
  • Proven Technology. With over 50 years' experience, over 2+ million residential and 50,000 installed and operating commercial systems, FujiClean Co., Ltd. (FujiClean USA's parent company) is the world's leading manufacturer of high efficiency onsite wastewater treatment systems. The company employs over 30 full-time staff engineers, with a focus on product testing and product improvement. The breakthrough CE and CEN model series are the company's most popular and successful product lines.
  • Low Profile. Aesthetically pleasing, the only visible indications of this one-tank system are two 20" diameter and one 24" at-grade covers. The unobtrusive football-sized FujiMAC 150R blowers and very small alarm panel can be located up to 100-ft. away and easily shielded from street view.
  • Easy Maintenance. The CEN21 unit is designed for efficient and effective semi-annual maintenance; the majority of which is accomplished with simple turning of control dials that purges heavy bio-film growth from the treatment media. No messy media removal or hose-down is necessary. A typical service visit of a commercial system that includes solids backwash cleaning takes less than one hour. The system is designed for efficient storage of sludge. Typical sludge pump out for commercial systems is recommended once every 1-2 years.
  • Low Operational Cost. Best-in-class MAC Series linear diaphragm air blowers are both energy efficient and durable with typically twice the warranty of competitive blowers. Compare the CEN21 system's 5.4 kWh/day power draw with the energy required of other systems. Low-cost air blower rebuild kits are available from all certified FujiClean service providers.
  • Quiet. A pair of FujiMAC 150RII blowers operate at a "dishwasher quiet" 58 decibels.
  • Easy Installation. Plug-and-play units are ready for installation upon delivery. No onsite system assembly required. Systems are compatible with both Tuf-Tite and Polylok risers.
Full Specifications:

Technical Specifications , CEN21, Commercial Treatment System
ModelCEN21
ANSI/NSF CertifiedN/A Height (inches)87.2
Load (Bedrooms)N/A Length (inches)187.3
Load Hydraulic (GPD)2,700 Width (inches)78.3
Typical Effluent Quality BOD (mg/L)10-20 Inlet Invert (inches, rounded to 1/8”)71
Typical Effluent Quality TSS (mg/L)10-20 Outlet Invert (inches, rounded to1/8”)68-7/8
Typical Effluent Quality TN (mg/L)10-20 Volume Total Tank (gallons)3,199
Power Use (kWh/day)2.88 Volume Chamber 1, Sedimentation (gal)
MaterialFibre-Reinforced Plastic Volume Chamber 2, Anaerobic (gal)
Weight (lbs.)1,543 Volume Chamber 3, Aeration (gal)
Access Ports (number)3 Volume Chamber 3a, Storage (gal)
Risers2 Tuf-Tite 20-inch Risers1 Tuf-Tite 24-inch Riser Volume Chamber 3b, Disinfection (gal)
MAC200R AIR BLOWER (standard blower for CEN21 system)
Blower Model / CFM (Standard)MAC200R / 7.0 CFM Outlet Pipe Size20mm ID(26mm OD)25/32 inch ID(1-1/32 inch OD)
Air Flow Volume200 L/min7.0 cfm Weight9.0kg19 lbs., 13 oz.
Normal Pressure18 kPa2.6 psi Power Consumption170W
Rated Voltage120V Power Cable3×18AWG×1.8m (5ft.11in.)
Frequency60Hz ManufacturerMade in Japan by Fuji Clean

Designers and Installers

Please choose to view or download a Septic System Structural PDF file or download a CAD file below:

FUJI CLEAN SEPTIC SYSTEMS BENEFITS

Free Consultation

Bring us your ideas and we'll put a conceptual project application together for you at no cost.

A One-Stop Shop

From initial review to formal design and contractor referrals for your project.

Strong Warranty

All of our products and components are backed by award winning manufacturer's warranties.

Get In Touch!

Residential Septic

Standard  Septic Solutions

Nitrogen Reduction Septic Solutions

Phosphorus Reduction Coming 2024

Commercial Septic

Standard  Septic Solutions

Nitrogen Reduction Septic Solutions

Phosphorus Reduction Coming 2024

Call Today!

207-592-6182

FinalLogo MASTER TEXT 1 - Reduced Nitrogen Septic Systems

© New England Septic Solutions - All Rights Reserved
Website By: Domain Masters Digital