PEACE OF MIND
ABOVE GROUND,
BECAUSE:
WE’RE TAKING CARE OF WHAT’S BELOW GROUND
At New England Septic Solutions, we offer the highest rated, greenest Commercial Septic System solutions. From standard performance to Nitrogen Reduction specific systems for your business.
STANDARD COMMERCIAL SEPTIC SYSTEMS
Your Fuji Clean treatment system accepts wastewater from your business, processes it and sends clean water back to the environment (usually into a soil absorption system such as a leach field). The advantage of our process is that our systems do the purification work ordinarily accomplished by the soil, which therefore allows smaller, shallower and less obtrusive drain fields.
FUJI CLEAN CE14
Functionally, FujiClean Commercial systems are designed to operate exactly as the FujiClean residential systems, with chamber volume, media volume and air input upsized proportionally. Certified to NSF/ANSI 40 standards, systems are fully built-out and designed to be delivered to the installation site plug-and-play ready.
Customized control panels are available to suit individual requirements. The default commercial control panel is equipped with auxiliary contacts that can be connected to a remote alarm notification system.
Application:
Capable of treating a hydraulic load capacity of 1,350 gpd, this compact system is housed in a 1,498-gallon tank with a footprint of only 9'11" x 5'9". No preceding septic tank is required or necessary for robust, dependable treatment (unless dictated by state or local regulations). Highly portable and installer-friendly with a weight of only 926 pounds, this unit can be easily maneuvered into tight and difficult sites; ideal for repair and replacement projects. A built-in flow equalizer easily accommodates variable flows and shock loadings. Designed with low maintenance requirements and energy efficiency as primary goals, this unit only draws 2.7 kWh/day of power and can be completely inspected and serviced in less than one hour.
Features:
- Reliable, Robust Performance. As with all FujiClean CE models in the both the residential and commercial categories, the BOD/TSS removal ratio of the CE14 is 95%, as consistently demonstrated in over 3,500 field samples collected world-wide as well as in controlled, 3rd party testing (NSF) in the U.S. from various CE series models.
- Proven Technology. With over 50 years' experience, over 2+ million residential and 50,000 installed and operating commercial systems, FujiClean Co., Ltd. (FujiClean USA's parent company) is the world's leading manufacturer of high efficiency onsite wastewater treatment systems. The company employs over 30 full-time staff engineers, with a focus on product testing and product improvement. The breakthrough CE and CEN model series are the company's most popular and successful product lines.
- Easy Maintenance. The CE14 unit is designed for efficient and effective maintenance. A majority of system cleaning is accomplished with the simple turning of control dials that reverse the flow of air and water while internally breaking up and purging heavy bio-film growth from the contact media. No messy media removal or hose-down is necessary. A typical service visit of a commercial system that includes solids backwash cleaning takes less than one hour. The system is designed for efficient storage of sludge. Typical sludge pump out for commercial systems is recommended once every 1-2 years.
- Low Operational Cost. Best-in-class MAC Series linear diaphragm air blowers are both energy efficient and durable with typically twice the warranty of competitive blowers. Compare the CE14 system's 3.7 kWh/day power draw with the energy required of other systems. Low-cost air blower rebuild kits are available from all certified FujiClean service providers.
- Quiet. FujiMAC blower operates at a "dishwasher quiet" 55 decibels.
- Easy Installation. Plug and play units are ready for installation upon delivery. No onsite system assembly required. Systems are compatible with both Tuf-Tite and Polylok risers.
Full Specifications:
| Technical Specifications , CE14, Commercial Treatment System | ||||
|---|---|---|---|---|
| Model | CE14 | |||
| ANSI/NSF Certified | NSF40 | Height (inches) | 78 | |
| Load (Bedrooms) | N/A | Length (inches) | 119 | |
| Load Hydraulic (GPD) | 1,350 | Width (inches) | 69 | |
| Typical Effluent Quality BOD (mg/L) | 10-20 | Inlet Invert (inches, rounded to 1/8”) | 62 | |
| Typical Effluent Quality TSS (mg/L) | 10-20 | Outlet Invert (inches, rounded to1/8”) | 59.5 | |
| Typical Effluent Quality TN (mg/L) | 10-20 | Volume Total Tank (gallons) | 1,498 | |
| Power Use (kWh/day) | 2.7 | Volume Chamber 1, Sedimentation (gal) | ||
| Material | Fibre-Reinforced Plastic | Volume Chamber 2, Anaerobic (gal) | ||
| Weight (lbs.) | 926 | Volume Chamber 3, Aeration (gal) | ||
| Access Ports (number) | 3 | Volume Chamber 3a, Storage (gal) | ||
| Risers | 2 Tuf-Tite 20-inch Risers1 Tuf-Tite 24-inch Riser | Volume Chamber 3b, Disinfection (gal) | ||
| MAC150R AIR BLOWER (standard blower for CE21 system) | ||||
| Blower Model / CFM (Standard) | MAC150R / 5.3 CFM | Outlet Pipe Size | 20mm ID(26mm OD)25/32 inch ID(1-1/32 inch OD) | |
| Air Flow Volume | 150 L/min5.3 cfm | Weight | 9.0kg19 lbs., 13 oz. | |
| Normal Pressure | 20 kPa2.6 psi | Power Consumption | 120W | |
| Rated Voltage | 120V | Power Cable | 3×18AWG×1.8m (5ft.11in.) | |
| Frequency | 60Hz | Manufacturer | Made in Japan by Fuji Clean |
Designers and Installers
Please choose to view or download a Septic System Structural PDF file or download a CAD file below:
FUJI CLEAN CE21
Functionally, FujiClean Commercial systems are designed to operate exactly as the FujiClean residential systems, with chamber volume, media volume and air input upsized proportionally. Certified to NSF/ANSI 40 standards, systems are fully built-out and designed to be delivered to the installation site plug-and-play ready.
Customized control panels are available to suit individual requirements. The default commercial control panel is equipped with auxiliary contacts that can be connected to a remote alarm notification system.
Application:
Capable of treating a hydraulic load capacity of 1,900 gpd, this compact system is housed in a 2,252-gallon tank with a footprint of only 12'9" x 6'1". No preceding septic tank is required or necessary for robust, dependable treatment (unless dictated by state or local regulations). Highly portable and installer-friendly with a weight of only 1,168 pounds, this unit can be easily maneuvered into tight and difficult sites; ideal for repair and replacement projects. A built-in flow equalizer easily accommodates variable flows and shock loadings. Designed with low maintenance requirements and energy efficiency as primary goals, this unit only draws 3.7 kWh/day of power and can be completely inspected and serviced in less than one hour.
Features:
- Reliable, Robust Performance. As with all FujiClean CE models in the both the residential and commercial categories, the BOD/TSS removal ratio of the CE21 is 95%, as consistently demonstrated in over 3,500 field samples collected world-wide as well as in controlled, 3rd party testing (NSF) in the U.S. from various CE series models.
- Proven Technology. With over 50 years' experience, over 2+ million residential and 50,000 installed and operating commercial systems, FujiClean Co., Ltd. (FujiClean USA's parent company) is the world's leading manufacturer of high efficiency onsite wastewater treatment systems. The company employs over 30 full-time staff engineers, with a focus on product testing and product improvement. The breakthrough CE and CEN model series are the company's most popular and successful product lines.
- Easy Maintenance. The CE21 unit is designed for efficient and effective maintenance. A majority of system cleaning is accomplished with the simple turning of control dials that reverse the flow of air and water while internally breaking up and purging heavy bio-film growth from the contact media. No messy media removal or hose-down is necessary. A typical service visit of a commercial system that includes solids backwash cleaning takes less than one hour. The system is designed for efficient storage of sludge. Typical sludge pump out for commercial systems is recommended once every 1-2 years.
- Low Operational Cost. Best-in-class MAC Series linear diaphragm air blowers are both energy efficient and durable with typically twice the warranty of competitive blowers. Compare the CE21 system's 3.7 kWh/day power draw with the energy required of other systems. Low-cost air blower rebuild kits are available from all certified FujiClean service providers.
- Quiet. FujiMAC blower operates at a "dishwasher quiet" 55 decibels.
- Easy Installation. Plug-and-play units are ready for installation upon delivery. No onsite system assembly required. Systems are compatible with both Tuf-Tite and Polylok risers.
Full Specifications:
| Technical Specifications , CE21, Commercial Treatment System | ||||
|---|---|---|---|---|
| Model | CE21 | |||
| ANSI/NSF Certified | N/A | Height (inches) | 81.3 | |
| Load (Bedrooms) | N/A | Length (inches) | 152.8 | |
| Load Hydraulic (GPD) | 1,876 | Width (inches) | 72.4 | |
| Typical Effluent Quality BOD (mg/L) | 10-20 | Inlet Invert (inches, rounded to 1/8”) | ||
| Typical Effluent Quality TSS (mg/L) | 10-20 | Outlet Invert (inches, rounded to1/8”) | ||
| Typical Effluent Quality TN (mg/L) | 10-20 | Volume Total Tank (gallons) | 2,252 | |
| Power Use (kWh/day) | 2.88 | Volume Chamber 1, Sedimentation (gal) | ||
| Material | Fibre-Reinforced Plastic | Volume Chamber 2, Anaerobic (gal) | ||
| Weight (lbs.) | 1,168 | Volume Chamber 3, Aeration (gal) | ||
| Access Ports (number) | 3 | Volume Chamber 3a, Storage (gal) | ||
| Risers | 2 Tuf-Tite 20-inch Risers1 Tuf-Tite 24-inch Riser | Volume Chamber 3b, Disinfection (gal) | ||
| MAC150R AIR BLOWER (standard blower for CE21 system) | ||||
| Blower Model / CFM (Standard) | MAC150R / 5.3 CFM | Outlet Pipe Size | 20mm ID(26mm OD)25/32 inch ID(1-1/32 inch OD) | |
| Air Flow Volume | 150 L/min5.3 cfm | Weight | 9.0kg19 lbs., 13 oz. | |
| Normal Pressure | 18 kPa2.6 psi | Power Consumption | 120W | |
| Rated Voltage | 120V | Power Cable | 3×18AWG×1.8m (5ft.11in.) | |
| Frequency | 60Hz | Manufacturer | Made in Japan by Fuji Clean |
Designers and Installers
Please choose to view or download a Septic System Structural PDF file or download a CAD file below:
FUJI CLEAN CE30
Functionally, FujiClean Commercial systems are designed to operate exactly as the FujiClean residential systems, with chamber volume, media volume and air input upsized proportionally. Certified to NSF/ANSI 40 standards, systems are fully built-out and designed to be delivered to the installation site plug-and-play ready.
Customized control panels are available to suit individual requirements. The default commercial control panel is equipped with auxiliary contacts that can be connected to a remote alarm notification system.
Application:
Capable of treating a hydraulic load capacity of 2,700 gpd, this compact system is housed in a 3,199-gallon tank with a footprint of only 15'4" x 6'7". No preceding septic tank is required or necessary for robust, dependable treatment (unless dictated by state or local regulations). Highly portable and installer-friendly with a weight of only 1,543 pounds, this unit can be easily maneuvered into tight and difficult sites; ideal for repair and replacement projects. A built-in flow equalizer easily accommodates variable flows and shock loadings. Designed with low maintenance requirements and energy efficiency as primary goals, this unit only draws 5.4 kWh/day of power and can be completely inspected and serviced in less than one hour.
Features:
- Reliable, Robust Performance. As with all FujiClean CE models in the both the residential and commercial categories, the BOD/TSS removal ratio of the CE30 is 95%, as consistently demonstrated in over 3,500 field samples collected world-wide as well as in controlled, 3rd party testing (NSF) in the U.S. from various CE series models.
- Proven Technology. With over 50 years' experience, over 2+ million residential and 50,000 installed and operating commercial systems, FujiClean Co., Ltd. (FujiClean USA's parent company) is the world's leading manufacturer of high efficiency onsite wastewater treatment systems. The company employs over 30 full-time staff engineers, with a focus on product testing and product improvement. The breakthrough CE and CEN model series are the company's most popular and successful product lines.
- Easy Maintenance. The CE30 unit is designed for efficient and effective maintenance. A majority of system cleaning is accomplished with the simple turning of control dials that reverse the flow of air and water while internally breaking up and purging heavy bio-film growth from the contact media. No messy media removal or hose-down is necessary. A typical service visit of a commercial system that includes solids backwash cleaning takes less than one hour. The system is designed for efficient storage of sludge. Typical sludge pump out for commercial systems is recommended once every 1-2 years.
- Low Operational Cost. Best-in-class MAC Series linear diaphragm air blowers are both energy efficient and durable with typically twice the warranty of competitive blowers. Compare the CE30 system's 5.4 kWh/day power draw with the energy required of other systems. Low-cost air blower rebuild kits are available from all certified FujiClean service providers.
- Quiet. A pair of FujiMAC 150RII blowers operate at a "dishwasher quiet" 58 decibels.
- Easy Installation. Plug and play units are ready for installation upon delivery. No onsite system assembly required. Systems are compatible with both Tuf-Tite and Polylok risers.
Full Specifications:
| Technical Specifications , CE30, Commercial Treatment System | ||||
|---|---|---|---|---|
| Model | CE30 | |||
| ANSI/NSF Certified | N/A | Height (inches) | 87.2 | |
| Load (Bedrooms) | N/A | Length (inches) | 187.3 | |
| Load Hydraulic (GPD) | 2,700 | Width (inches) | 78.3 | |
| Typical Effluent Quality BOD (mg/L) | 10-20 | Inlet Invert (inches, rounded to 1/8”) | 71 | |
| Typical Effluent Quality TSS (mg/L) | 10-20 | Outlet Invert (inches, rounded to1/8”) | 68-7/8 | |
| Typical Effluent Quality TN (mg/L) | 10-20 | Volume Total Tank (gallons) | 3,199 | |
| Power Use (kWh/day) | 2.88 | Volume Chamber 1, Sedimentation (gal) | ||
| Material | Fibre-Reinforced Plastic | Volume Chamber 2, Anaerobic (gal) | ||
| Weight (lbs.) | 1,543 | Volume Chamber 3, Aeration (gal) | ||
| Access Ports (number) | 3 | Volume Chamber 3a, Storage (gal) | ||
| Risers | 2 Tuf-Tite 20-inch Risers1 Tuf-Tite 24-inch Riser | Volume Chamber 3b, Disinfection (gal) | ||
| MAC200R AIR BLOWER (standard blower for CE30 system) | ||||
| Blower Model / CFM (Standard) | MAC200R / 7.0 CFM | Outlet Pipe Size | 20mm ID(26mm OD)25/32 inch ID(1-1/32 inch OD) | |
| Air Flow Volume | 200 L/min7.0 cfm | Weight | 9.0kg19 lbs., 13 oz. | |
| Normal Pressure | 18 kPa2.6 psi | Power Consumption | 170W | |
| Rated Voltage | 120V | Power Cable | 3×18AWG×1.8m (5ft.11in.) | |
| Frequency | 60Hz | Manufacturer | Made in Japan by Fuji Clean |
Designers and Installers
Please choose to view or download a Septic System Structural PDF file or download a CAD file below:
NITROGEN REDUCTION COMMERCIAL SEPTIC SYSTEMS
Your Fuji Clean treatment system accepts wastewater from your business, processes it and sends clean water back to the environment (usually into a soil absorption system such as a leach field). The advantage of our process is that our systems do the purification work ordinarily accomplished by the soil, which therefore allows smaller, shallower and less obtrusive drain fields. These systems focus on Nitrogen Reduction for an even greener septic system solution.
FUJI CLEAN CEN14
The CEN14 is a dependable, robust, one-tank workhorse. No preceding septic tank is required or necessary for robust, dependable treatment (unless dictated by state or local regulations). Featuring a footprint of only 12'-9" x 6', this system is rated to treat domestic strength wastewater flows of 1,350-gallons per day to NSF 40/245 standards making it a perfect choice for septic professionals designing systems in environmentally sensitive locations where maximum nitrogen reduction is required or desired.
Weighing only 1,168 pounds, this fiber-reinforced plastic (FRP) unit can be squeezed into tight and difficult sites using standard excavating equipment. Designed to accommodate variable flows and shock loadings as well as being highly energy efficient (3.7 kWh/day), like the other CEN models, is ideally suited for both replacement sites and new construction. Low maintenance requirements allow the unit to be completely inspected and serviced in less than one hour.
Application:
Designed to treat up to 1,350 gallons per day of domestic strength wastewater, the one-tank CEN14 model is designed for large residential / small commercial enhanced nitrogen removal in nutrient sensitive areas. Certified to NSF/ANSI 40/245 standards, this exceptionally small footprint system has demonstrated best-in-class nitrogen removal performance in multiple-state field testing protocols.
Features:
- Reliable, Robust Performance. Based on both 3rd party testing in the U.S. (NSF), and corroborated by thousands of field test data points worldwide (including the U.S.) the CEN14 produces a consistent effluent quality with a pollutant removal ratio of around 97% - 98% and nitrogen reducing ratio of 75% (NSF data), For a technical explanation of system application, please refer to our Technical Summary.
- Proven Technology. With over 50 years' experience, over 2+ million residential and 50,000 installed and operating commercial systems, FujiClean Co., Ltd. (FujiClean USA's parent company) is the world's leading manufacturer of high efficiency onsite wastewater treatment systems. The company employs over 30 full-time staff engineers, with a focus on product testing and product improvement. The breakthrough CE and CEN model series are the company's most popular and successful product lines.
- Low Profile. Aesthetically pleasing, the only visible indication of these one-tank systems are two 20" diameter and one 24" at-grade covers. The unobtrusive football-sized FujiMAC 200R blower and very small alarm panel can be located up to 100-ft. away and easily shielded from direct view.
- Easy Maintenance. The CEN14 unit is designed for efficient and effective semi-annual maintenance; the majority of which is accomplished with simple turning of control dials that purges heavy bio-film growth from the treatment media. No messy media removal or hose-down is necessary. A typical service visit of a commercial system that includes solids backwash cleaning takes less than one hour. The system is designed for efficient storage of sludge. Typical sludge pump out for commercial systems is recommended once every 1-2 years.
- Low Operational Cost. Best-in-class MAC Series linear diaphragm air blowers are both energy efficient and durable with typically twice the warranty of competitive blowers. Compare the CEN14 system's 3.7 kWh/day power draw with the energy required of other systems. Low-cost air blower rebuild kits are available from all certified FujiClean service providers.
- Quiet. FujiMAC blower operates at a "dishwasher quiet" 55 decibels.
- Easy Installation. Plug and play units are ready for installation upon delivery. No onsite system assembly required. Systems are compatible with both Tuf-Tite and Polylok risers.
Full Specifications:
| Technical Specifications , CEN14, Commercial Treatment System | ||||
|---|---|---|---|---|
| Model | CEN14 | |||
| ANSI/NSF Certified | N/A | Height (inches) | 81.3 | |
| Load (Bedrooms) | N/A | Length (inches) | 152.8 | |
| Load Hydraulic (GPD) | 1,876 | Width (inches) | 72.4 | |
| Typical Effluent Quality BOD (mg/L) | 10-20 | Inlet Invert (inches, rounded to 1/8”) | ||
| Typical Effluent Quality TSS (mg/L) | 10-20 | Outlet Invert (inches, rounded to1/8”) | ||
| Typical Effluent Quality TN (mg/L) | 10-20 | Volume Total Tank (gallons) | 2,252 | |
| Power Use (kWh/day) | 2.88 | Volume Chamber 1, Sedimentation (gal) | ||
| Material | Fibre-Reinforced Plastic | Volume Chamber 2, Anaerobic (gal) | ||
| Weight (lbs.) | 1,168 | Volume Chamber 3, Aeration (gal) | ||
| Access Ports (number) | 3 | Volume Chamber 3a, Storage (gal) | ||
| Risers | 2 Tuf-Tite 20-inch Risers1 Tuf-Tite 24-inch Riser | Volume Chamber 3b, Disinfection (gal) | ||
| MAC150R AIR BLOWER (standard blower for CEN14 system) | ||||
| Blower Model / CFM (Standard) | MAC150R / 5.3 CFM | Outlet Pipe Size | 20mm ID(26mm OD)25/32 inch ID(1-1/32 inch OD) | |
| Air Flow Volume | 150 L/min5.3 cfm | Weight | 9.0kg19 lbs., 13 oz. | |
| Normal Pressure | 18 kPa2.6 psi | Power Consumption | 120W | |
| Rated Voltage | 120V | Power Cable | 3×18AWG×1.8m (5ft.11in.) | |
| Frequency | 60Hz | Manufacturer | Made in Japan by Fuji Clean |
Designers and Installers
Please choose to view or download a Septic System Structural PDF file or download a CAD file below:
FUJI CLEAN CEN21
The CEN21 is a dependable, robust, one-tank workhorse. No preceding septic tank is required or necessary for robust, dependable treatment (unless dictated by state or local regulations). Featuring a footprint of only 15'-4" x 6'-7", this system is rated to treat domestic strength wastewater flows of 1,900-gallons per day to NSF 40/245 standards making it a perfect choice for septic professionals designing systems in environmentally sensitive locations where maximum nitrogen reduction is required or desired.
Weighing only 1,543 pounds, this fiber-reinforced plastic (FRP) unit can be squeezed into tight and difficult sites using standard excavating equipment. Designed to accommodate variable flows and shock loadings as well as being highly energy efficient (5.4 kWh/day), like the other CEN models, is ideally suited for both replacement sites and new construction. Low maintenance requirements allow the unit to be completely inspected and serviced in less than one hour.
Application:
Designed to treat up to 1,900 gallons per day of domestic strength wastewater, the one-tank CEN21 model is designed for commercial enhanced nitrogen removal in nutrient sensitive areas. Certified to NSF/ANSI 40/245 standards, this exceptionally small footprint system has demonstrated best-in-class nitrogen removal performance in multiple-state field testing protocols.
Features:
- Reliable, Robust Performance. Based on both 3rd party testing in the U.S. (NSF) and corroborated by thousands of field test data points worldwide (including the U.S.), the CEN21 produces a consistent effluent quality with a pollutant removal ratio of around 97% - 98% and nitrogen reducing ratio of 75% (NSF data).
- Proven Technology. With over 50 years' experience, over 2+ million residential and 50,000 installed and operating commercial systems, FujiClean Co., Ltd. (FujiClean USA's parent company) is the world's leading manufacturer of high efficiency onsite wastewater treatment systems. The company employs over 30 full-time staff engineers, with a focus on product testing and product improvement. The breakthrough CE and CEN model series are the company's most popular and successful product lines.
- Low Profile. Aesthetically pleasing, the only visible indications of this one-tank system are two 20" diameter and one 24" at-grade covers. The unobtrusive football-sized FujiMAC 150R blowers and very small alarm panel can be located up to 100-ft. away and easily shielded from street view.
- Easy Maintenance. The CEN21 unit is designed for efficient and effective semi-annual maintenance; the majority of which is accomplished with simple turning of control dials that purges heavy bio-film growth from the treatment media. No messy media removal or hose-down is necessary. A typical service visit of a commercial system that includes solids backwash cleaning takes less than one hour. The system is designed for efficient storage of sludge. Typical sludge pump out for commercial systems is recommended once every 1-2 years.
- Low Operational Cost. Best-in-class MAC Series linear diaphragm air blowers are both energy efficient and durable with typically twice the warranty of competitive blowers. Compare the CEN21 system's 5.4 kWh/day power draw with the energy required of other systems. Low-cost air blower rebuild kits are available from all certified FujiClean service providers.
- Quiet. A pair of FujiMAC 150RII blowers operate at a "dishwasher quiet" 58 decibels.
- Easy Installation. Plug-and-play units are ready for installation upon delivery. No onsite system assembly required. Systems are compatible with both Tuf-Tite and Polylok risers.
Full Specifications:
| Technical Specifications , CEN21, Commercial Treatment System | ||||
|---|---|---|---|---|
| Model | CEN21 | |||
| ANSI/NSF Certified | N/A | Height (inches) | 87.2 | |
| Load (Bedrooms) | N/A | Length (inches) | 187.3 | |
| Load Hydraulic (GPD) | 2,700 | Width (inches) | 78.3 | |
| Typical Effluent Quality BOD (mg/L) | 10-20 | Inlet Invert (inches, rounded to 1/8”) | 71 | |
| Typical Effluent Quality TSS (mg/L) | 10-20 | Outlet Invert (inches, rounded to1/8”) | 68-7/8 | |
| Typical Effluent Quality TN (mg/L) | 10-20 | Volume Total Tank (gallons) | 3,199 | |
| Power Use (kWh/day) | 2.88 | Volume Chamber 1, Sedimentation (gal) | ||
| Material | Fibre-Reinforced Plastic | Volume Chamber 2, Anaerobic (gal) | ||
| Weight (lbs.) | 1,543 | Volume Chamber 3, Aeration (gal) | ||
| Access Ports (number) | 3 | Volume Chamber 3a, Storage (gal) | ||
| Risers | 2 Tuf-Tite 20-inch Risers1 Tuf-Tite 24-inch Riser | Volume Chamber 3b, Disinfection (gal) | ||
| MAC200R AIR BLOWER (standard blower for CEN21 system) | ||||
| Blower Model / CFM (Standard) | MAC200R / 7.0 CFM | Outlet Pipe Size | 20mm ID(26mm OD)25/32 inch ID(1-1/32 inch OD) | |
| Air Flow Volume | 200 L/min7.0 cfm | Weight | 9.0kg19 lbs., 13 oz. | |
| Normal Pressure | 18 kPa2.6 psi | Power Consumption | 170W | |
| Rated Voltage | 120V | Power Cable | 3×18AWG×1.8m (5ft.11in.) | |
| Frequency | 60Hz | Manufacturer | Made in Japan by Fuji Clean |
Designers and Installers
Please choose to view or download a Septic System Structural PDF file or download a CAD file below:
FUJI CLEAN SEPTIC SYSTEMS BENEFITS
Free Consultation
Bring us your ideas and we'll put a conceptual project application together for you at no cost.
A One-Stop Shop
From initial review to formal design and contractor referrals for your project.
Strong Warranty
All of our products and components are backed by award winning manufacturer's warranties.
